Backing Materials for Abrasive Tools and Industrial Converting
Mianue Abrasives supplies backing materials for abrasive tool production, including paper backing, cloth backing and non-woven backing. These fiberglass backing plates are designed for buyers who need strong and tough supporting bases for converting into flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels.
- Paper Backing
- Cloth Backing
- Non-woven Backing
- T27 / T28 / T29 / T41
- 46mm-400mm Diameter Range
- 10mm / 15mm / 16mm / 22mm / 40mm Bore
Category Procurement Summary
A structured backing material category for abrasive manufacturers, converters and industrial buyers who need fiberglass backing plates with different surface materials and consistent specification communication.
Backing Materials for Flap Discs, Flap Wheels and Polishing Wheel Production
Backing materials are not finished abrasive tools by themselves. They are structural base components used during abrasive tool converting and assembly. In this product category, Mianue Abrasives organizes backing materials into paper backing, cloth backing and non-woven backing according to the surface material on the fiberglass backing plate. All three product directions belong to the fiberglass backing plate series and share the key features of high strength and good toughness.
These backing materials are mainly used for converting into flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels. For B2B purchasing, the important information includes backing type, model type, product diameter, bore size, surface material, application tool and order quantity. This page is built to help distributors, abrasive factories and industrial consumable buyers compare the three backing material pages before sending a quotation request.
High Strength
Designed as a structural support base for abrasive tools that require reliable backing strength during converting and use.
Good Toughness
Suitable for abrasive tool production where backing flexibility, toughness and stable support are important.
Multiple Surface Options
Paper, cloth and non-woven surfaces help buyers choose backing materials according to product structure and converting requirement.
B2B Converting Use
Suitable for factories and buyers producing flap discs, vertical flap wheels, wool wheels and polishing wheel products.
Explore Backing Material Product Pages
The three sub-product pages below help buyers compare backing materials by surface type. Each product page supports a clearer purchasing path for abrasive tool converting and wholesale sourcing.
Paper Backing
Paper backing refers to a fiberglass backing plate with a black paper surface. It is used as a backing base for converting abrasive products such as flap discs, vertical flap wheels and polishing wheels.
Cloth Backing
Cloth backing refers to a fiberglass backing plate with a woven fabric surface. It is selected by buyers who need a textile surface backing base for abrasive tool conversion.
Non-woven Backing
Non-woven backing refers to a fiberglass backing plate with a non-woven fabric surface. It supports abrasive tool production where the buyer requires a non-woven surface backing direction.
Paper Backing with Black Paper Surface for Abrasive Tool Converting
Paper backing is a fiberglass backing plate with a black paper surface. It belongs to the fiberglass backing plate series and is designed with high strength and good toughness. For abrasive tool manufacturers and buyers, this backing material provides a structural base used in the production and conversion of multiple abrasive products.
This backing type is mainly used for producing flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels. Available model types include T27, T28, T29 and T41. The listed specification range is 46mm-400mm, with bore options of 10mm, 15mm, 16mm, 22mm and 40mm.
Cloth Backing with Woven Fabric Surface for Abrasive Tool Production
Cloth backing is a fiberglass backing plate with a woven fabric surface. It belongs to the same fiberglass backing plate series and shares the core characteristics of high strength and good toughness. This product direction is suitable for buyers who need a fabric-surfaced backing base for abrasive tool conversion.
Cloth backing can be used for converting into flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels. Available model types include T27, T28, T29 and T41. The listed specification range is 46mm-400mm, with bore options of 10mm, 15mm, 16mm, 22mm and 40mm.
Non-woven Backing for Abrasive and Polishing Wheel Conversion
Non-woven backing is a fiberglass backing plate with a non-woven fabric surface. It is designed for buyers who require a non-woven surface backing material within the fiberglass backing plate series. Like the other backing directions, it features high strength and good toughness for abrasive tool production.
This backing type is mainly used for converting into flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels. Available models include T27, T28, T29 and T41. The listed specification range is 46mm-400mm, with bore options of 10mm, 15mm, 16mm, 22mm and 40mm.
Backing Materials Specification Summary
The specification range is consistent across the three backing material directions. This helps B2B buyers standardize their inquiry format and compare paper backing, cloth backing and non-woven backing by surface material rather than basic size structure.
Backing Materials for Multiple Abrasive Tool Product Lines
Backing materials are selected according to the abrasive product being converted. Mianue Abrasives backing materials are mainly used in the production of flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels.
Flap Disc Production
Backing materials provide the supporting base for flap disc conversion, helping manufacturers match model type and diameter requirements.
Vertical Flap Wheels
Suitable for abrasive tool buyers producing vertical flap wheel products that require stable fiberglass backing plate support.
Wool Wheels
Used as a base material direction for wool wheel production where backing support and product form are important.
Black Diamond Tools
Supports conversion into black diamond abrasive products for buyers building a wider abrasive tool supply range.
Diamond Flap Discs
Can be used in diamond flap disc production where the backing base must match the required model and bore size.
Non-woven Flap Discs
Supports the production of non-woven flap disc products for surface conditioning and finishing product lines.
PVA Sponge Polishing Wheels
Suitable for conversion into PVA sponge polishing wheels according to production design and buyer specification.
Wholesale Tool Conversion
Suitable for buyers ordering backing materials in bulk for multiple abrasive and polishing product lines.
T27, T28, T29 and T41 Backing Material Models
Model type selection is important for abrasive tool converting. The same backing material category can serve different product shapes and product structures. Buyers should confirm whether they require T27, T28, T29 or T41 before sending an inquiry.
T27
T27 backing materials are commonly requested when buyers need a flat-type backing direction for abrasive tool production.
T28
T28 backing materials are available within the listed model range and should be confirmed by application and product drawing.
T29
T29 backing materials are used when the buyer’s abrasive tool design requires this specific backing form.
T41
T41 backing materials are included in the available model range and can be discussed according to converting requirements.
Backing Plate Bore Options for Abrasive Tool Manufacturing
Bore size affects tool compatibility and final product assembly. The listed bore options are 10mm, 15mm, 16mm, 22mm and 40mm. Buyers should confirm the required bore according to finished abrasive tool design, machine compatibility and market specification.
10mm Bore
Suitable for small-format backing plate requirements where the final abrasive tool structure requires a smaller center hole.
15mm and 16mm Bore
Common intermediate bore options for buyers who need specific tool compatibility and regional product matching.
22mm Bore
A frequently requested bore size in abrasive tool purchasing. Buyers should confirm exact finished product requirement before ordering.
40mm Bore
Suitable for backing material applications requiring larger bore dimensions and corresponding product design.
Paper Backing vs Cloth Backing vs Non-woven Backing
The three backing materials share similar strength, toughness, model range, specification range and bore options. The main purchasing difference is the surface material direction: black paper surface, woven fabric surface or non-woven fabric surface.
| Backing Type | Surface Material | Category | Features | Models | Specification | Bore Options | Product Page |
|---|---|---|---|---|---|---|---|
| Paper Backing | Black paper surface | Fiberglass backing plate series | High strength and good toughness | T27 / T28 / T29 / T41 | 46mm-400mm | 10 / 15 / 16 / 22 / 40mm | View Paper Backing |
| Cloth Backing | Woven fabric surface | Fiberglass backing plate series | High strength and good toughness | T27 / T28 / T29 / T41 | 46mm-400mm | 10 / 15 / 16 / 22 / 40mm | View Cloth Backing |
| Non-woven Backing | Non-woven fabric surface | Fiberglass backing plate series | High strength and good toughness | T27 / T28 / T29 / T41 | 46mm-400mm | 10 / 15 / 16 / 22 / 40mm | View Non-woven Backing |
How to Choose the Right Backing Material
Buyers should not choose backing materials only by product image. The correct selection depends on surface material, finished abrasive tool type, model type, diameter range, bore size and packaging requirement. A clear inquiry helps reduce repeated communication and improves quotation accuracy.
Choose by Surface Material
Select paper backing when black paper surface is required, cloth backing when woven fabric surface is required, and non-woven backing when the buyer needs a non-woven fabric surface.
- Black paper surface
- Woven fabric surface
- Non-woven fabric surface
Choose by Finished Product
Confirm whether the backing material will be converted into flap discs, vertical flap wheels, wool wheels, black diamond tools, diamond flap discs, non-woven flap discs or PVA sponge polishing wheels.
- Flap disc converting
- Flap wheel production
- Polishing wheel assembly
Choose by Specification
Confirm model type, specification size and bore size before requesting a quote. The listed options include T27, T28, T29, T41, 46mm-400mm and bore sizes from 10mm to 40mm.
- Model: T27 / T28 / T29 / T41
- Specification: 46mm-400mm
- Bore: 10 / 15 / 16 / 22 / 40mm
Backing Materials Technical Data for RFQ Preparation
The table below gives purchasing teams a practical RFQ checklist. For quotation, buyers should provide backing type, model, size, bore, product use, quantity and packaging requirement.
| RFQ Item | Available Options | Why It Matters |
|---|---|---|
| Backing Type | Paper backing, cloth backing, non-woven backing | Determines surface material direction and product page selection. |
| Product Category | Fiberglass backing plate series | Helps buyers position the product as a base material for abrasive tool converting. |
| Model | T27 / T28 / T29 / T41 | Matches final abrasive tool structure and converting requirement. |
| Specification | 46mm-400mm | Determines the finished abrasive tool size range. |
| Bore Size | 10mm / 15mm / 16mm / 22mm / 40mm | Controls compatibility with finished tool design and usage requirement. |
| Application Product | Flap disc, vertical flap wheel, wool wheel, black diamond, diamond flap disc, non-woven flap disc, PVA sponge polishing wheel | Helps confirm whether the selected backing material fits the buyer’s production plan. |
Who Should Source Backing Materials from Mianue Abrasives?
Backing materials are suitable for buyers involved in abrasive tool manufacturing, abrasive converting, polishing wheel production and industrial consumable supply. The product is especially relevant when buyers need a reliable backing base rather than a finished abrasive tool only.
Abrasive Tool Factories
Manufacturers can source backing materials for converting into flap discs, vertical flap wheels and polishing products.
Abrasive Distributors
Distributors can add paper, cloth and non-woven backing options to their abrasive component supply range.
OEM Buyers
OEM buyers can discuss model type, diameter, bore size, packaging and product matching for backing material supply.
Industrial Consumable Buyers
Buyers supplying abrasive tool components can use the category to source backing materials for different finished products.
Structured Product Information for Backing Material Buyers
B2B buyers need clear information before sending an inquiry. This page separates backing materials by surface type and presents shared specifications in a readable structure. Buyers can understand what Mianue Abrasives supplies, what the backing materials are used for, which models are available, what specification range is listed and what details should be provided for quotation.
Clear Category Structure
The page organizes backing materials into paper backing, cloth backing and non-woven backing, each with a dedicated product page.
Specification Transparency
Models, specification range and bore options are written directly in the page so buyers can prepare accurate RFQ details.
Application-Based Matching
The product use cases connect backing materials to flap discs, flap wheels, wool wheels and polishing wheel production.
Request Backing Materials Quotation
Mianue Abrasives supports B2B buyers with backing material product matching and wholesale quotation communication. Buyers can request paper backing, cloth backing or non-woven backing according to finished abrasive tool type, model, size, bore and packaging requirement.
To improve quotation accuracy, please provide the required backing type, model, specification, bore size, intended product use, order quantity, packaging request and destination information. Complete inquiry details help reduce repeated communication and support faster product matching.
Recommended Inquiry Details
Backing Materials FAQ
These questions help buyers confirm backing type, model, size, bore and application before contacting Mianue Abrasives.
What backing materials does Mianue Abrasives supply?
Mianue Abrasives supplies paper backing, cloth backing and non-woven backing within the fiberglass backing plate series.
What is paper backing?
Paper backing is a fiberglass backing plate with a black paper surface. It is used as a backing base for converting abrasive tools.
What is cloth backing?
Cloth backing is a fiberglass backing plate with a woven fabric surface. It is suitable for abrasive tool production requiring a fabric surface backing material.
What is non-woven backing?
Non-woven backing is a fiberglass backing plate with a non-woven fabric surface, used for abrasive and polishing product conversion.
What models are available?
The listed model types are T27, T28, T29 and T41.
What specification range is available?
The listed product specification range is 46mm-400mm.
What bore sizes are available?
The listed bore sizes are 10mm, 15mm, 16mm, 22mm and 40mm.
What products can these backing materials be converted into?
They are mainly used for converting into flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels.
What information should I provide for a quotation?
Please provide backing type, model, specification, bore size, intended product use, order quantity, packaging requirement and destination information.
Can Mianue Abrasives support wholesale or OEM purchasing?
Yes. Mianue Abrasives can support wholesale inquiry communication and product matching for B2B backing material buyers.
Need Backing Materials for Abrasive Tool Converting?
Send your required backing type, model, size, bore, finished product use and order quantity. Mianue Abrasives will help match suitable paper backing, cloth backing or non-woven backing options for your abrasive tool production needs.
Offices
Jingkai Industrial Park, Zhengzhou Economic Development Zone, Henan Province, China
WhatsApp: +86 18439853194
Email: mianue@zhonghengtech.com