Non-woven Backing Manufacturer in China
Mianue Abrasives supplies non-woven backing for abrasive tool converting and industrial backing plate sourcing. This product is a fiberglass backing plate with a non-woven fabric surface, designed with high strength and good toughness for producing flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels.
- Non-woven Fabric Surface
- Fiberglass Backing Plate Series
- T27 / T28 / T29 / T41
- 46mm-400mm Specification
- 10mm / 15mm / 16mm / 22mm / 40mm Bore
- Wholesale and OEM Inquiry Support
Procurement Summary
A non-woven backing product for buyers who need a high-strength, tough fiberglass backing plate with non-woven fabric surface for abrasive tool conversion.
Non-woven Backing with Non-woven Fabric Surface for Abrasive Tool Production
Non-woven backing is a fiberglass backing plate with a non-woven fabric surface. It belongs to the fiberglass backing plate series and is used as a structural base material in abrasive tool production. For buyers who convert or assemble abrasive products, non-woven backing is not a finished abrasive disc; it is a supporting base component used to build finished products such as flap discs, vertical flap wheels, wool wheels and polishing wheels.
The product is defined by practical B2B procurement parameters: high strength, good toughness, model options including T27, T28, T29 and T41, a specification range of 46mm-400mm, and bore options of 10mm, 15mm, 16mm, 22mm and 40mm. These details help abrasive manufacturers, distributors and industrial consumable buyers prepare accurate RFQ information before contacting Mianue Abrasives.
What Is Non-woven Backing Used For?
Non-woven backing is mainly used as a fiberglass backing plate base for converting abrasive products. It can be used to produce flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels. Buyers usually choose non-woven backing when they need a non-woven fabric surface backing material with high strength and good toughness for abrasive tool manufacturing.
Non-woven Fabric Surface
Designed as a non-woven fabric surface backing option within the fiberglass backing plate series for abrasive tool conversion.
High Strength
Supports abrasive product structures where backing strength is an important factor in converting and assembly.
Good Toughness
Suitable for abrasive tool manufacturing where the backing base needs a practical balance of support and toughness.
Converting Use
Used in the production of flap discs, vertical flap wheels, wool wheels, diamond flap discs and PVA sponge polishing wheels.
Key Features of Non-woven Backing Fiberglass Backing Plate
For industrial buyers, non-woven backing should be evaluated as a base material rather than a finished abrasive. Its main value lies in structural support, non-woven fabric surface compatibility and clear specification matching. Mianue Abrasives presents this product with direct information that purchasing teams can use for sourcing decisions.
High-Strength Backing Base
The non-woven backing is designed with high strength, making it suitable for abrasive products that require a dependable backing plate during production and use.
Good Toughness for Converting
Good toughness helps support different abrasive tool structures and gives buyers a practical base material for conversion into several finished products.
Non-woven Surface Direction
The non-woven fabric surface helps define this product against paper backing and cloth backing, making selection clearer for buyers.
Multiple Model Types
Available model types include T27, T28, T29 and T41. Buyers should specify the model according to finished abrasive tool design.
Wide Size Range
The listed product specification range is 46mm-400mm, supporting different abrasive tool sizes and market requirements.
Multiple Bore Options
Bore options include 10mm, 15mm, 16mm, 22mm and 40mm. Buyers should confirm the required bore according to tool compatibility.
Non-woven Backing for Flap Discs, Flap Wheels and Polishing Wheel Conversion
Non-woven backing is mainly used for converting into multiple abrasive tool products. A buyer should confirm the intended finished product before ordering because model, size and bore requirements may vary according to the final abrasive tool structure.
Flap Discs
Used as a backing base for flap disc production where product structure, bore size and model type must be matched.
Vertical Flap Wheels
Suitable for converting into vertical flap wheel products requiring a stable fiberglass backing structure.
Wool Wheels
Can be used in wool wheel production where a backing base is required for product assembly.
Black Diamond Tools
Supports conversion into black diamond abrasive products for buyers developing wider abrasive tool lines.
Diamond Flap Discs
Used in diamond flap disc production when the buyer needs a suitable backing plate format.
Non-woven Flap Discs
Supports non-woven flap disc production for surface conditioning and finishing tool product lines.
PVA Sponge Polishing Wheels
Can be used as a backing direction for PVA sponge polishing wheel converting and assembly.
OEM Abrasive Components
Suitable for bulk purchasing projects where buyers need non-woven backing materials for multiple abrasive tool SKUs.
Non-woven Backing Specifications for RFQ Preparation
Clear specifications are essential for B2B inquiry communication. Buyers should confirm model, diameter range, bore size and intended product use before asking for a quotation.
| Item | Available Information | Buyer Notes |
|---|---|---|
| Product Name | Non-woven Backing | Also described as non-woven fabric fiberglass backing plate or non-woven surface backing material. |
| Surface Material | Non-woven fabric surface | Different from black paper surface and woven fabric surface backing options. |
| Product Category | Fiberglass backing plate series | Used as a base material for abrasive tool converting. |
| Product Features | High strength and good toughness | Suitable for supporting abrasive product structures. |
| Models | T27 / T28 / T29 / T41 | Confirm model according to finished product form and application requirement. |
| Specification Range | 46mm-400mm | Provide exact required size when requesting quotation. |
| Bore Options | 10mm / 15mm / 16mm / 22mm / 40mm | Confirm bore size according to finished abrasive tool design. |
| Main Uses | Flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs, PVA sponge polishing wheels | State intended product use to improve product matching accuracy. |
T27, T28, T29 and T41 Non-woven Backing Options
Model selection is a key part of abrasive backing material purchasing. Buyers should confirm the final abrasive tool structure before selecting T27, T28, T29 or T41. If the buyer already has drawings, samples or previous order specifications, those details should be included in the inquiry.
T27 Non-woven Backing
Suitable when the buyer needs a T27 backing form for abrasive tool converting. Confirm diameter and bore size before quotation.
T28 Non-woven Backing
T28 is included in the available model range. Buyers should specify the required size and final product use.
T29 Non-woven Backing
T29 non-woven backing can be discussed according to the finished abrasive tool structure and converting process.
T41 Non-woven Backing
T41 is available within the product model range and should be confirmed with the required bore and specification.
46mm-400mm Non-woven Backing with 10mm, 15mm, 16mm, 22mm and 40mm Bore Options
The listed non-woven backing specification range is 46mm-400mm. Bore options include 10mm, 15mm, 16mm, 22mm and 40mm. For B2B buyers, size and bore directly affect compatibility with the final abrasive tool design and market requirement.
Small Diameter Requirements
Buyers sourcing smaller backing plates should specify the exact diameter and bore to avoid mismatch during production.
Common Bore Options
10mm, 15mm, 16mm, 22mm and 40mm bore sizes are listed. Buyers should confirm the intended finished product before choosing.
Large Diameter Requirements
For larger sizes within the 46mm-400mm range, provide model type, bore and product use for accurate quotation.
How to Choose the Right Non-woven Backing for Abrasive Tool Production
Non-woven backing selection should follow a practical procurement path. Buyers should start with the finished abrasive product, then confirm model, diameter, bore, surface material and order quantity. This approach reduces repeated communication and improves sourcing accuracy.
Choose by Finished Product
Confirm whether the non-woven backing will be used for flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs or PVA sponge polishing wheels.
- Flap disc production
- Vertical flap wheel converting
- Polishing wheel assembly
Choose by Model and Size
Specify T27, T28, T29 or T41, then confirm the exact diameter within the 46mm-400mm range. If the buyer has previous samples, product drawings or market specification, those details should be provided.
- Model: T27 / T28 / T29 / T41
- Diameter: 46mm-400mm
- Sample or drawing recommended
Choose by Bore Requirement
Bore size should match the finished abrasive tool design. Available bore options include 10mm, 15mm, 16mm, 22mm and 40mm.
- 10mm bore
- 15mm / 16mm / 22mm bore
- 40mm bore
Non-woven Backing vs Paper Backing and Cloth Backing
Non-woven backing, paper backing and cloth backing all belong to the fiberglass backing plate series. The main difference is the surface material. Non-woven backing uses a non-woven fabric surface, paper backing uses a black paper surface, and cloth backing uses a woven fabric surface. Buyers should choose according to finished product structure and converting requirements.
| Backing Type | Surface Material | Shared Features | Shared Models | Shared Specification Range | Buyer Selection Logic |
|---|---|---|---|---|---|
| Non-woven Backing | Non-woven fabric surface | High strength and good toughness | T27 / T28 / T29 / T41 | 46mm-400mm | Choose when a non-woven fabric surface fiberglass backing plate is required. |
| Paper Backing | Black paper surface | High strength and good toughness | T27 / T28 / T29 / T41 | 46mm-400mm | Choose when a black paper surface backing material is required. |
| Cloth Backing | Woven fabric surface | High strength and good toughness | T27 / T28 / T29 / T41 | 46mm-400mm | Choose when a woven fabric surface backing direction is required. |
Structured Product Information for B2B Non-woven Backing Buyers
Abrasive component buyers need clear, verifiable product information before submitting an inquiry. This page presents the non-woven backing product identity, non-woven fabric surface, category, specifications, model types, bore options and conversion uses directly in readable text. It avoids vague claims and focuses on the data a purchasing manager needs when comparing backing material suppliers.
Clear Product Identity
The product is defined as non-woven backing with non-woven fabric surface within the fiberglass backing plate series.
Readable Specification
Model types, specification range and bore options are written directly in the page for easy sourcing review.
Application-Based Matching
The product is connected to real conversion uses such as flap discs, vertical flap wheels and polishing wheels.
Request Non-woven Backing Quotation
Mianue Abrasives supports B2B buyers with non-woven backing product matching and wholesale quotation communication. Buyers can request non-woven fabric surface fiberglass backing plates according to model type, product specification, bore size, finished product use, order quantity and packing requirement.
To improve quotation accuracy, please provide the required model, diameter, bore size, intended abrasive tool, quantity, packaging preference and destination information. Complete inquiry details help reduce repeated communication and support faster product matching.
Recommended Inquiry Details
Non-woven Backing FAQ
These questions help buyers confirm product identity, surface material, models, specification range, bore options and application before contacting Mianue Abrasives.
What is non-woven backing?
Non-woven backing is a fiberglass backing plate with a non-woven fabric surface. It belongs to the fiberglass backing plate series and is used as a base material for abrasive tool converting.
What are the main features of this non-woven backing?
The main features are high strength and good toughness.
What models are available?
The listed model types are T27, T28, T29 and T41.
What specification range is available?
The listed product specification range is 46mm-400mm.
What bore sizes are available?
The listed bore sizes are 10mm, 15mm, 16mm, 22mm and 40mm.
What products can non-woven backing be converted into?
It is mainly used for converting into flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels.
Is non-woven backing a finished abrasive tool?
No. It is a backing material used as a base component for abrasive tool production and conversion.
How should I choose between non-woven backing, paper backing and cloth backing?
Choose according to the required surface material. Non-woven backing uses a non-woven fabric surface, paper backing uses a black paper surface, and cloth backing uses a woven fabric surface.
What information should I provide for quotation?
Please provide model, diameter, bore size, finished product use, order quantity, packaging requirement and destination information.
Can Mianue Abrasives support wholesale or OEM purchasing?
Yes. Mianue Abrasives can support wholesale inquiry communication and product matching for B2B backing material buyers.
Need Non-woven Backing for Abrasive Tool Converting?
Send your required model, size, bore, finished product use and order quantity. Mianue Abrasives will help match suitable non-woven fabric surface fiberglass backing plate options for your abrasive tool production needs.
Offices
Jingkai Industrial Park, Zhengzhou Economic Development Zone, Henan Province, China
WhatsApp: +86 18439853194
Email: mianue@zhonghengtech.com