Paper Backing Manufacturer in China
Mianue Abrasives supplies paper backing for abrasive tool converting and industrial backing plate sourcing. This product is a fiberglass backing plate with a black paper surface, designed with high strength and good toughness for producing flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels.
- Black Paper Surface
- Fiberglass Backing Plate Series
- T27 / T28 / T29 / T41
- 46mm-400mm Specification
- 10mm / 15mm / 16mm / 22mm / 40mm Bore
- Wholesale and OEM Inquiry Support
Procurement Summary
A paper backing product for buyers who need a high-strength, tough fiberglass backing plate with black paper surface for abrasive tool conversion.
Paper Backing with Black Paper Surface for Abrasive Tool Production
Paper backing is a fiberglass backing plate with a black paper surface. It belongs to the fiberglass backing plate series and is used as a structural base material in abrasive tool production. For buyers who convert or assemble abrasive products, paper backing is not a finished sanding tool; it is a support component used to build finished products such as flap discs, vertical flap wheels, wool wheels and polishing wheels.
The product is described by clear B2B procurement parameters: high strength, good toughness, model options including T27, T28, T29 and T41, a specification range of 46mm-400mm, and bore options of 10mm, 15mm, 16mm, 22mm and 40mm. These details help abrasive manufacturers, distributors and industrial consumable buyers prepare accurate RFQ information before contacting Mianue Abrasives.
What Is Paper Backing Used For?
Paper backing is mainly used as a fiberglass backing plate base for converting abrasive products. It can be used to produce flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels. Buyers usually choose paper backing when they need a black paper surface backing material with high strength and good toughness for abrasive tool manufacturing.
Black Paper Surface
Designed as a black paper surface backing option within the fiberglass backing plate series for abrasive tool conversion.
High Strength
Supports abrasive product structures where backing strength is an important factor in converting and assembly.
Good Toughness
Suitable for abrasive tool manufacturing where the backing base needs a practical balance of support and toughness.
Converting Use
Used in the production of flap discs, flap wheels, wool wheels and polishing wheel products.
Key Features of Paper Backing Fiberglass Backing Plate
For industrial buyers, paper backing should be evaluated as a base material rather than a finished abrasive. Its main value lies in structural support, product compatibility and clear specification matching. Mianue Abrasives presents this product with direct information that purchasing teams can use for sourcing decisions.
High-Strength Backing Base
The paper backing is designed with high strength, making it suitable for abrasive products that require a dependable backing plate during production and use.
Good Toughness for Converting
Good toughness helps support different abrasive tool structures and gives buyers a practical base material for conversion into several finished products.
Black Paper Surface Direction
The black paper surface helps define this product against cloth backing and non-woven backing, making selection clearer for buyers.
Multiple Model Types
Available model types include T27, T28, T29 and T41. Buyers should specify the model according to finished abrasive tool design.
Wide Size Range
The listed product specification range is 46mm-400mm, supporting different abrasive tool sizes and market requirements.
Multiple Bore Options
Bore options include 10mm, 15mm, 16mm, 22mm and 40mm. Buyers should confirm the required bore according to tool compatibility.
Paper Backing for Flap Discs, Flap Wheels and Polishing Wheel Conversion
Paper backing is mainly used for converting into multiple abrasive tool products. A buyer should confirm the intended finished product before ordering because model, size and bore requirements may vary according to the final abrasive tool structure.
Flap Discs
Used as a backing base for flap disc production where product structure, bore size and model type must be matched.
Vertical Flap Wheels
Suitable for converting into vertical flap wheel products requiring a stable backing structure.
Wool Wheels
Can be used in wool wheel production where a backing base is required for product assembly.
Black Diamond Tools
Supports conversion into black diamond abrasive products for buyers developing wider abrasive tool lines.
Diamond Flap Discs
Used in diamond flap disc production when the buyer needs a suitable backing plate format.
Non-woven Flap Discs
Supports non-woven flap disc production for surface conditioning and finishing tool product lines.
PVA Sponge Polishing Wheels
Can be used as a backing direction for PVA sponge polishing wheel converting and assembly.
OEM Abrasive Components
Suitable for bulk purchasing projects where buyers need backing materials for multiple abrasive tool SKUs.
Paper Backing Specifications for RFQ Preparation
Clear specifications are essential for B2B inquiry communication. Buyers should confirm model, diameter range, bore size and intended product use before asking for a quotation.
| Item | Available Information | Buyer Notes |
|---|---|---|
| Product Name | Paper Backing | Also described as black paper fiberglass backing plate or paper surface backing material. |
| Surface Material | Black paper surface | Different from woven fabric surface and non-woven fabric surface backing options. |
| Product Category | Fiberglass backing plate series | Used as a base material for abrasive tool converting. |
| Product Features | High strength and good toughness | Suitable for supporting abrasive product structures. |
| Models | T27 / T28 / T29 / T41 | Confirm model according to finished product form and application requirement. |
| Specification Range | 46mm-400mm | Provide exact required size when requesting quotation. |
| Bore Options | 10mm / 15mm / 16mm / 22mm / 40mm | Confirm bore size according to finished abrasive tool design. |
| Main Uses | Flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs, PVA sponge polishing wheels | State intended product use to improve product matching accuracy. |
T27, T28, T29 and T41 Paper Backing Options
Model selection is a key part of abrasive backing material purchasing. Buyers should confirm the final abrasive tool structure before selecting T27, T28, T29 or T41. If the buyer already has drawings, samples or previous order specifications, those details should be included in the inquiry.
T27 Paper Backing
Suitable when the buyer needs a T27 backing form for abrasive tool converting. Confirm diameter and bore size before quotation.
T28 Paper Backing
T28 is included in the available model range. Buyers should specify the required size and final product use.
T29 Paper Backing
T29 paper backing can be discussed according to the finished abrasive tool structure and converting process.
T41 Paper Backing
T41 is available within the product model range and should be confirmed with the required bore and specification.
46mm-400mm Paper Backing with 10mm, 15mm, 16mm, 22mm and 40mm Bore Options
The listed paper backing specification range is 46mm-400mm. Bore options include 10mm, 15mm, 16mm, 22mm and 40mm. For B2B buyers, size and bore are not decorative information; they directly affect compatibility with the final abrasive tool design and market requirement.
Small Diameter Requirements
Buyers sourcing smaller backing plates should specify the exact diameter and bore to avoid mismatch during production.
Common Bore Options
10mm, 15mm, 16mm, 22mm and 40mm bore sizes are listed. Buyers should confirm the intended finished product before choosing.
Large Diameter Requirements
For larger sizes within the 46mm-400mm range, provide model type, bore and product use for accurate quotation.
How to Choose the Right Paper Backing for Abrasive Tool Production
Paper backing selection should follow a practical procurement path. Buyers should start with the finished abrasive product, then confirm model, diameter, bore, surface material and order quantity. This approach reduces repeated communication and improves sourcing accuracy.
Choose by Finished Product
Confirm whether the paper backing will be used for flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs or PVA sponge polishing wheels.
- Flap disc production
- Vertical flap wheel converting
- Polishing wheel assembly
Choose by Model and Size
Specify T27, T28, T29 or T41, then confirm the exact diameter within the 46mm-400mm range. If the buyer has previous samples, product drawings or market specification, those details should be provided.
- Model: T27 / T28 / T29 / T41
- Diameter: 46mm-400mm
- Sample or drawing recommended
Choose by Bore Requirement
Bore size should match the finished abrasive tool design. Available bore options include 10mm, 15mm, 16mm, 22mm and 40mm.
- 10mm bore
- 15mm / 16mm / 22mm bore
- 40mm bore
Paper Backing vs Cloth Backing and Non-woven Backing
Paper backing, cloth backing and non-woven backing all belong to the fiberglass backing plate series. The main difference is the surface material. Paper backing uses a black paper surface, cloth backing uses a woven fabric surface, and non-woven backing uses a non-woven fabric surface. Buyers should choose according to finished product structure and converting requirements.
| Backing Type | Surface Material | Shared Features | Shared Models | Shared Specification Range | Buyer Selection Logic |
|---|---|---|---|---|---|
| Paper Backing | Black paper surface | High strength and good toughness | T27 / T28 / T29 / T41 | 46mm-400mm | Choose when a black paper surface fiberglass backing plate is required. |
| Cloth Backing | Woven fabric surface | High strength and good toughness | T27 / T28 / T29 / T41 | 46mm-400mm | Choose when a woven fabric surface backing material is required. |
| Non-woven Backing | Non-woven fabric surface | High strength and good toughness | T27 / T28 / T29 / T41 | 46mm-400mm | Choose when a non-woven fabric surface backing direction is required. |
Structured Product Information for B2B Paper Backing Buyers
Abrasive component buyers need clear, verifiable product information before submitting an inquiry. This page presents the paper backing product identity, surface material, category, specifications, model types, bore options and conversion uses directly in readable text. It avoids vague claims and focuses on the data a purchasing manager needs when comparing backing material suppliers.
Clear Product Identity
The product is defined as paper backing with black paper surface within the fiberglass backing plate series.
Readable Specification
Model types, specification range and bore options are written directly in the page for easy sourcing review.
Application-Based Matching
The product is connected to real conversion uses such as flap discs, vertical flap wheels and polishing wheels.
Request Paper Backing Quotation
Mianue Abrasives supports B2B buyers with paper backing product matching and wholesale quotation communication. Buyers can request black paper surface fiberglass backing plates according to model type, product specification, bore size, finished product use, order quantity and packing requirement.
To improve quotation accuracy, please provide the required model, diameter, bore size, intended abrasive tool, quantity, packaging preference and destination information. Complete inquiry details help reduce repeated communication and support faster product matching.
Recommended Inquiry Details
Paper Backing FAQ
These questions help buyers confirm product identity, surface material, models, specification range, bore options and application before contacting Mianue Abrasives.
What is paper backing?
Paper backing is a fiberglass backing plate with a black paper surface. It belongs to the fiberglass backing plate series and is used as a base material for abrasive tool converting.
What are the main features of this paper backing?
The main features are high strength and good toughness.
What models are available?
The listed model types are T27, T28, T29 and T41.
What specification range is available?
The listed product specification range is 46mm-400mm.
What bore sizes are available?
The listed bore sizes are 10mm, 15mm, 16mm, 22mm and 40mm.
What products can paper backing be converted into?
It is mainly used for converting into flap discs, vertical flap wheels, wool wheels, black diamond abrasive tools, diamond flap discs, non-woven flap discs and PVA sponge polishing wheels.
Is paper backing a finished abrasive tool?
No. It is a backing material used as a base component for abrasive tool production and conversion.
How should I choose between paper backing, cloth backing and non-woven backing?
Choose according to the required surface material. Paper backing uses a black paper surface, cloth backing uses a woven fabric surface, and non-woven backing uses a non-woven fabric surface.
What information should I provide for quotation?
Please provide model, diameter, bore size, finished product use, order quantity, packaging requirement and destination information.
Can Mianue Abrasives support wholesale or OEM purchasing?
Yes. Mianue Abrasives can support wholesale inquiry communication and product matching for B2B backing material buyers.
Need Paper Backing for Abrasive Tool Converting?
Send your required model, size, bore, finished product use and order quantity. Mianue Abrasives will help match suitable black paper surface fiberglass backing plate options for your abrasive tool production needs.
Offices
Jingkai Industrial Park, Zhengzhou Economic Development Zone, Henan Province, China
WhatsApp: +86 18439853194
Email: mianue@zhonghengtech.com